Technical Regulations of the Customs Union TR CU 010/2011 "On the safety of machines and equipment"

Technical Regulations of the Customs Union TR CU 010/2011 "On the safety of machines and equipment"

Scheme number	scheme element			Applying	The document of confirming compliance
	Product testing,         type of researching	Production rate	Production control
1C	Samples testing	analysis of production conditions	testing of product samples and (or) analysis of production conditions	For products produced commercially Applicant - the manufacturer, including a foreigner, in the presence authorized person designated by the manufacturer in the Customs Union	certificate of compliance for the products produced commercially
3C	Samples testing	-	-	For a lot of products       (single product)                      Applicant - the seller (supplier), the manufacturer, including a foreigner	certificate of compliance for a production lot
9C	Based on analysis of technical documentation	-	-	For a limited amount of production lot supplied by the foreign manufacturer or for complex products, designed to equip enterprises in the Customs Union                   Applicant - the manufacturer, including a foreigner, in the presence authorized person designated by the manufacturer in the Customs Union	certificate of compliance for a limited production lot

Scheme number	Scheme element			Applying	The document of confirming compliance
	Product testing,  type of researching	Production rate	Production control
1D	Test samples of products by manufacturers	-	Production control by manufacturers	For products produced commercially Applicant - the manufacturer of the Member State of the Customs Union or a person authorized by the foreign manufacturer in the Customs Union	The declaration of conformity for the products produced commercially
2D	batch testing of products (single product) by the applicant	-	-	For a production lot (single product)          Applicant - the manufacturer, the seller (supplier) of the Member State of the Customs Union, the foreign manufacturer or authorized person in the territory of the Customs Union	The declaration of conformity for a production lot (single product)
3D	testing of product samples in an accredited testing laboratory (center)	-	Production control by manufacturers	For products produced commercially Applicant - the manufacturer of the Member State of the Customs Union or a person authorized by the foreign manufacturer in the Customs Union	The declaration of conformity for the products produced commercially
4D	batch testing of products (single product) in an accredited testing laboratory (center)	-	-	For a production lot (single product)          Applicant - the manufacturer, the seller (supplier) of the Member State of the Customs Union, the foreign manufacturer or authorized person in the territory of the Customs Union	The declaration of conformity for a production lot (single product)
5D	type of testing (reseaching)		Production control by manufacturers	For products produced commercially Applicant - the manufacturer of the Member State of the Customs Union or a person authorized by the foreign manufacturer in the Customs Union	The declaration of conformity for the products produced commercially
6D	testing of product samples in an accredited testing laboratory (center)	Certification of management system and inspection control by  department of management system certification

Come into effect from 15 February 2013!

Technical regulations of the Customs Union TR CU 010/2011 "On the safety of machinery and equipment"was adopted by Decision of the Commission of the Customs Union on October 18, 2011 № 823.

"List of standards as a result of which, on a voluntary basis, compliance with the technical regulations of the Customs Union "On the safety of machinery and equipment" was approved by Decision of the Commission of the Customs Union on October 18, 2011 № 823.

This technical regulation was developed in accordance with the Agreement on common principles and rules of technical regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation on November 18, 2010.

This technical regulation applies to machines and (or) equipment manufactured in circulation at the common customs territory of the Customs Union.

This technical regulation applies to machines and (or) equipment which were revealed and identified hazards with requirements to eliminate or reduce of them are installed in accordance with application № 1 and № 2 of the Technical Regulations.

The action of this technical regulation applies to machines and (or) equipment used at hazardous production facilities.

If risks from machines and (or) equipment, fully or partially installed in other technical regulations of the Customs Union, EurAsEC the machines and (or) equipment must comply with the technical regulations of the Customs Union, EurAsEC.

This technical regulation shall not apply to the following types of machines and (or) equipment:

- Machines and (or) equipment related to ensuring the integrity and sustainability of the networks and the radio frequency spectrum;

- Machines and (or) equipment used for medical purposes and used in direct contact with the patient (X-ray, diagnostic, therapeutic, orthopedic, dental, surgical equipment);

- Machines and (or) equipment specifically designed for use in the field of nuclear energy. On machinery and (or) equipment for general industrial use used in the field of nuclear energy the effect of these technical regulations apply to the extent not contrary to the requirements for nuclear and radiation safety;

- Wheeled vehicles, other than those stated on their machines and (or) equipment;

- Sea and river transport vehicles (ships and craft, including those used for their machines and (or) equipment);

- Aircraft and spacecraft;

- Rolling stock and facilities specifically designed for use on the railways and underground;

- Attractions;

- Weapons and military equipment;

- Machines and (or) equipment intended for use by persons with disabilities;

- Agricultural and forestry tractors and trailers, other than those stated on their machines and (or) equipment;

- Drilling platforms, other than those on which machinery and (or) equipment.

Certification of machines and (or) equipment of technical regulations for compliance with this form of certification are carried out on 1c, 3c, 9c.

Applicant for certification schemes 1c, 9c can be registered in accordance with the legislation of the Member State of the Customs Union on its territory, a legal entity or natural person as an individual entrepreneur or the manufacturer, or to perform the functions of the foreign manufacturer in a contract with him in part ensure compliance with the requirements of the delivered products and the technical rules of liability or non-conformity of delivered products to the requirements of the technical regulations of the Customs Union (the person performing the functions of the foreign manufacturer).

Applicant for certification scheme 3c can be registered in accordance with the legislation of the Member State of the Customs Union on its territory, a legal entity or natural person as an individual entrepreneur, or  a manufacturer or seller, or performing the functions of the foreign manufacturer in a contract with him in part ensure compliance with the requirements of the delivered products and the technical rules of liability or non-conformity of delivered products to the requirements of the technical regulations of the Customs Union (the person performing the functions of the foreign manufacturer). 

A more detailed description of the scheme and the requirements for certification documentation provided by the applicant can be found on this link.

Declaring machines and (or) equipment for conformity requirements of this technical regulation is carried out in the form of declarations by the applicant on the basis of their own evidence and (or) obtained with the participation of the certification body or an accredited testing laboratory (center), included in the Unified Register of Certification Department and testing laboratories (centers) of the Customs Union on schemes 1d, 2d, 3d, 4d, 5d, 6d.  

A more detailed description of the scheme and the requirements of the declaration of the documentation provided by the Applicant for registration can be found at this link.

According to the applicant instead of declaring conformity of machinery and (or) equipment may be the certification schemes of certification equivalent circuits of declaration of conformity provided for machines and (or) equipment of these technical regulations including the absence or insufficiency of the applicant's own evidence confirm compliance with the requirements of the technical regulations.

As long as the machines and (or) equipment conformity assessment procedures have been established by the present technical regulation and the relevant record has to be made in the Single Register of certificates of conformity and registered declarations of conformity issued by the applicant on a single form.

Machines and (or) equipment are issued in the market and should be marked with a single mark of  product handling on the market of the Member States of the Customs Union approved by the Commission Decision of the Customs Union of 15.07.2011 N 711 (as amended on 20.07.2012)  when it’s under this technical regulation and other technical regulations of the Customs Union, EurAsEC and provided that they have passed conformity assessment procedures set out in this technical regulations as well as other technical regulations of the Customs Union, EurAsEC.

Declaration of compliance or conformity issued after positive results of the researching according to a single form approved by the Commission of the Customs Union on December 25, 2012 № 293 is the only document confirming compliance of machines or equipment with requirements of these technical regulations.