CU TR 010

1. This technical regulation is designed in accordance with the Agreement on common principles and rules of technical regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation. 2. This technical regulation is designed for establishing on a single customs territory of the Customs Union, a mandatory requirements for the application and enforcement to the machines and (or) equipment in the process of development (designing), manufacturing, installation, commissioning, operation, storage, transportation, marketing and disposal, for the providing the free movement of machines and (or) equipment put into circulation in the common customs territory of the Customs Union. 3. If, in respect of machines and (or) equipment will be accepted other technical regulations of the Customs Union, technical regulations of the Eurasian Economic Community (hereinafter - EEC) establishing requirements for the machines and (or) equipment, the machines and (or) equipment shall meet the requirements of these technical regulations of the Customs Union, EEC, the effect of which they are subject. Article 1. The field of application 1. This technical regulation extends to machines and (or) equipment, manufactured in circulation at the common customs territory of the Customs Union. 2. This technical regulation establishes minimum requirements safety of machines and (or) equipment in the process of development (designing), manufacturing, installation, commissioning, operation, storage, transportation, marketing and disposal in order to protect human life or health, property, environment, animals life and health, for prevent actions that mislead consumers. 3. This technical regulation extends to machines and (or) equipment for which were revealed and identified hazards, the requirements to their eliminate or reduce are given in accordance with Annex № 1 and № 2 of the Technical Regulations. 4. This technical regulation shall not apply to the following types of machines and (or) equipment: - Machines and (or) equipment related to ensuring the integrity and sustainability of the networks function and using of the radio frequency spectrum; - Machines and (or) equipment used for medical purposes and used in direct contact with the patient (X-ray, diagnostic, therapeutic, orthopedic, dental, surgical equipment); - Machines and (or) equipment specifically designed for use in the field of nuclear energy. On machinery and (or) equipment for general industrial use used in the field of nuclear energy the effect of these technical regulations apply to the extent not contrary to the requirements for nuclear and radiation safety; - Wheeled vehicles, other than machines and (or) equipment installed on theirs; - Sea and river transport vehicles (ships and craft, including those used for their machines and (or) equipment); - Aircraft and spacecraft; - Rolling stock and facilities specifically designed for use on the railways and underground; - Attractions; - Weapons and military equipment; - Machines and (or) equipment intended for use by persons with disabilities;4 - Agricultural and forestry tractors and trailers, other than machines and (or) equipment installed on theirs; - Drilling platforms, other than machines and (or) equipment installed on theirs. 5. The action of this technical regulation applies to machines and (or) equipment used at hazardous production facilities. 6. If risks from machines, and (or) equipment, fully or partially installed in other technical regulations of the Customs Union, EEC, the machines and (or) equipment must comply with the technical regulations of the Customs Union, EEC, on which they are applied. 7. When identifying the machines and (or) equipment correspondence is established specific machines and (or) equipment sample or their description, as which can be used the standards referred to in item 1 of Article 6 of these technical regulations, classifications, specifications and drawings, specifications, operational documentation. 8. Additional safety requirements for certain categories of machinery and equipment are installed in accordance with Annex № 2.