윤활유 시험목록4

윤활유 시험목록4

 윤활유(오일&그리스) 시험 목록4

Method Number	Method Title
ASTM D2074	Amine Value
ASTM D2155	Autoignition Temperature
ASTM D2714	Block on Ring Friction & Wear Test - per run
ASTM D1824	Brookfield Viscosity (Resin) - need temperature
ASTM D2196	Brookfield Viscosity, Procedure A, B or C - Specify
ASTM D2416	Carbon Residue, Conradson, of Petroleum Products
ASTM D2140	Carbon -Type Composition of Insulating Oils
ASTM D2500	Cloud Point of Transparent Fluids
ASTM D2194	Concentration of Formaldehyde Solutions
ASTM D2649	Corrosion of Solid Film Lubricants
ASTM D2711	Demulsibility Characteristics Procedure A or B
ASTM D1816	Dielectric Breakdown Voltage of Insulating Oils Using VDE Electrodes - 1mm OR 2mm gap
ASTM D2265	Dropping Point by Aluminum Block
ASTM D2624	Electrical Conductivity of Aviation Distillate Fuels
ASTM D1976	Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D2595	Evaporation Loss - 6 1/2 / 22 / 72 / 500 hours - need temperature
ASTM D2625A	Falex Pin & V Block Test Procedure A Endurance Life - per run
ASTM D2625B	Falex Pin & V Block Test Procedure B Load Carrying Capacity
ASTM D2670	Falex Pin & V Block Tooth Wear Test
ASTM D2803	Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM D2510	Fluid Resistance/Film Adhesion per Fluid
ASTM D1881	Foaming Tendencies of Engine Coolants in Glassware
ASTM D2266	Four Ball Wear of Grease - 1/2/4 hrs. / 1 hr. w/Coefficient of Friction Graph / w/Coef. of Friction Graph - 2 hrs
ASTM D2266	Four Ball Wear of Grease (M-50 Steel Balls)
ASTM D2386	Freezing Point of Aviation Fuel
ASTM D1748	Humidity Cabinet Test - 100/192/400/900/1000 hours
ASTM D2619	Hydrolytic Stability
ASTM D1957	Hydroxyl Number
ASTM D2596	Load Wear Index of Grease - Four Ball EP (Extreme Pressure) / Weld Load ONLY
ASTM D2783	Load Wear Index of Oil - Four Ball EP (Extreme Pressure) / Weld Load ONLY
ASTM D2878	Molecular Weight (by evaporation & vapor pressure)
ASTM D2502	Molecular Weight from Viscosity - includes 100°F and 210°F viscosities.
ASTM D2834	Non-Volatile Matter of Emulsions
ASTM D2109	Non-Volatile Residue
ASTM D2274	Oxidation Stability of Distillate Fuel Oil
ASTM D2440	Oxidation Stability of Mineral Insulating Oil - 72/164 hrs.
ASTM D2276	Particulate Contamination
ASTM D1876	Peel Resistance of Adhesives T-Peel Test
ASTM D2110	pH of Water Extracted from Halogenated Organic Solvents
ASTM D1747	Refractive Index of Viscous Material - 20°C or 25°C
ASTM D1831	Roll Stability 2 hrs. between 20°C and 35°C / 100°C (can only run - this temp for 2 hrs.) / Ambient
ASTM D1831	Roll Stability 24/50/96 hrs. - 180°F (cannot run above this temp.)
ASTM D2272	Rotating Pressure Vessel Oxidation Test - RPVOT - up to 48 hrs - after 48 hrs add $1.00 per hour run
ASTM D2112	Rotating Pressure Vessel Oxidation Test - RPVOT - up to 48 hrs - reports average of 2 runs
ASTM D2161	Saybolt (SUS) - Viscosity & Calculation
ASTM D1894	Sled Test (Static & Kinetic Coef Friction of Plastic Film)
ASTM D2603	Sonic Shear Stability -choose Reference Fluid A or B / with 40°C and 100°C Viscosities
ASTM D2622	Sulfur by X-Ray Fluorescence (WDXRF)
ASTM D2511	Thermal Shock Sensitivity (Dry Film Lubricant)
ASTM D2070	Thermal Stability of Hydraulic Oils
ASTM D2509	Timken Load Carrying Test of Grease (cost per load) specify starting load
ASTM D2782	Timken Load Carrying Test of Oil - pass/fail load
ASTM D2782	Timken OK Load Carrying Test of Oil - Estimated 5 loads
ASTM D1982	Titer Point of Fatty Acids
ASTM D2273	Trace Sediment Contamination
ASTM D2879	Vapor Pressure by Isotenoscope - Single temperature - for each additional temperature
ASTM D2878	Vapor Pressure, Apparent
ASTM D2270	Viscosity Index -calculation with 40°C and 100°C, D445 viscosities
ASTM D2532	Viscosity, Kinematic, Storage 72 hrs. (0°F to -65°F) - need temp.
ASTM D2369	Volatile Content of Coatings
ASTM D1796	Water and Sediment

*참고자료: http://cfile232.uf.daum.net/attach/260670445785FAE33722B7

*출처: www.anycerti.com

[J]