부식(Corrosion) 시험 표준
| ASTM G 48 | Standard Test Method for Pitting and Crevice Corrosion Resistance of Stainless Steel and Related Alloys by the use of Ferric Chloride Solution |
| ASTM G1 – 03 (2011) | Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens |
| DNV CN 33.1 | Corrosion prevention of tanks and holds |
| EEMUA 194 | Guidelines for Materials Selection and Corrosion Control for Subsea Oil & gas Production Equipment |
| EFC 17 | Corrosion Resistant Alloys for Oil & Gas Production. Guidance on General Requirements and Test Methods for H2S Service |
| EFC 23 | CO2 Corrosion Control in Oil & Gas Production – Design Considerations |
| EFC 39 | The use of Corrosion Inhibitors in Oil & Gas Production |
| EFC 42 | Corrosion in refineries |
| ISO 11972 | Corrosion-‐resistant cast steels for general applications |
| ISO 12944 -‐ 3 | Paints and Varnishes – Corrosion protection of steel structures by protective paint systems – Part 3: Design considerations. |
| ISO 12944 -‐ 5 | Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 5: Protective paint systems. |
| ISO 13680 | PGNI – Corrosion-‐resistant alloy seamless tubes for use as casing, tubing and coupling stock – Technical delivery conditions |
| ISO 15156-‐3 | PGNI – Corrosion-‐resistant alloy seamless tubes for use as casing, tubing and coupling stock – Technical delivery conditions |
| ISO 19840 | Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Measurement of, and acceptance criteria for, the thickness of dry film on rough surfaces |
| ISO 3506 -‐ 1 | Mechanical properties of corrosion resistant stainless steel fasteners – Part 1: Bolts, screws and studs. |
| ISO 3506 -‐ 2 | Mechanical properties of corrosion resistant stainless steel fasteners – Part 2: Nuts. |
| NACE MR 0175 | Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments |
| NACE RP 0169 | Control of External Corrosion on Underground or Submerged Metallic PipingSystems |
| NACE RP 0169 | Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments |
| NACE RP 0170 | Protection of Austenitic Stainless St eel s and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking during Shut down of Refinery Equipment |
| NACE RP 0170 | Protection of Austenitic Stainless Steel in Refineries against Stress Corrosion, Cracking by use of Naturalizing Solutions during shutdown |
| NACE RP 0175 | Control of Internal Corrosion in Steel Pipelines and Piping Systems |
| NACE RP 0176 | Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production |
| NACE RP 0176 | Standard Recommended Practice, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production |
| NACE RP 0177 | Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems |
| NACE RP 0192 | Monitoring Corrosion in oil & gas production with iron counts |
| NACE RP 0472 | Methods and Control s t o Prevent In-‐Service Environment al Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments |
| NACE RP 0675 | Control of external corrosion on offshore steel pipelines |
| NACE RP 0775 | Preparation and Installation of Corrosion Coupons and Interpretation of Test Data in Oil field Operations |
| NACE RP 0775 | Preparation and installation of corrosion coupons and interpretation of test data in oil field operation |
| NACE TM 0169 | Control of external corrosion on underground or sub merged metallic piping systems |
| NORSOK M-‐503 | Cathodic Protection |
| NORSOK M-‐506 | CO2 Corrosion rate calculation model |
| U.S. Mil. Spec. 18001 | Military Specification for Anodes, Corrosion preventive, Zinc; slab, disc and rod shaped. |
스케일링(Scaling) 표준
| NACE TM 0374 | Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems) |
| NACE TM 0197 | Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/ or Strontium Sulfate from Solution (for Oil and Gas Production Systems |
| NACE TM 0397 | Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers |
| ASTM C672/C672M | Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to |
| ASTM D4993-08 | Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis |
| STP 717 | Geothermal Scaling and Corrosion |
| ASTM D4692-01 | Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for Reverse Osmosis and Nanofiltration |
| ASTM 7126 | Standard Test Method for On-‐Line Colorimetric Measurement of Silica |
| ASTM D859 | Test Method for Silica in Water |
수압파쇄용액
ISO 3628-‐6: the functional and material testing of hydraulic fluids, is available in the lab.
프로판트 시험 표준
API RP 56 -‐ Recommended Practices for Testing Sand Used in Hydraulic Fracturing Operations
API RP 58 -‐ Recommended Practices for Testing Sand Used in Gravel Packing Operations
API RP 60 -‐ Recommended Practices for Testing High-‐Strength Proppants Used in Hydraulic Fracturing Operations
API RP 61 -‐ Recommended Practices Evaluating Short Term Proppant Pack Conductivity
ISO 13503-‐1 / API RP 13M -‐ Measurement of viscous properties of completion fluids
ISO 13503-‐2 / API RP 19C -‐ Proppant crush test for hydraulic fracturing and gravel-‐packing operations
ISO 13503-‐2 §4 and §5 – Sampling and Sample Handling
ISO 13503-‐2 §6 – Sieve Analysis (particle size)
ISO 13503-‐2 §7 – Sphericity and roundness
ISO 13503-‐2 §8 – Acid solubility
ISO 13503-‐2 §9 – Turbidity (fines and impurities)
ISO 13503-‐2 §10 – Density
ISO 13503-‐2 §11 – Crush resistance
ISO 13503-‐3 / API RP 13J -‐ Testing of heavy brines
ISO 13503-‐4 / API RP 13M-‐4 -‐ Procedure for measuring stimulation and gravel-‐pack fluid leakoff under static conditions
ISO 13503-‐5 / API RP 19D -‐ Procedures for measuring the long-‐term conductivity of proppants
*출처 : www.anycerti.com
[J]
댓글 없음:
댓글 쓰기