2016년 1월 27일 수요일

MIL-STD-282 필터, 보호복, 마스크 시험

MIL-STD-282 : Filter Units, Protective Clothing, Gas-Mask Components and Related Products: Performance Test Methods.

이 규격은 1952년경 제정된 MIL-F-10462A를 대체하여 1956년 5월 28일 제정되었습니다. 이 후 2012년 1월 17일, 2012년 9월 24일, 2015년, 6월 30일, 2015년 12월 22일 등 개정되었으나 개정된 규격은 미국정부와 계약된 공급자에게만 규격배포가 허용됩니다. 따라서 그외의 목적으로는 1956년 제정된 규격만 열람할 수 있습니다. 

출처 : www.anycerti.com


paints, coatings, plastics, adhesives and sealants 의 ASTM 시험목록

paints, coatings, plastics, adhesives and sealants 의 ASTM 시험목록
D968 Abrasion Resistance of Organic Coatings by Falling Abrasive
D2197 Adhesion of Organic Coatings by Scrape Adhesion
D4946Blocking Resistance
D2196 Brookfield Viscosity
D6736 Burnish Resistance of Latex Paints
D2244 Calculation of Color Differences From Instrumentally Measured Color Coordinates
D1603 Carbon Black in Olefin Plastics
D4214 Chalking of Exterior Paint Films
D1308 Chemical Resistance (Household)
D696 Coefficient of Linear Thermal Expansion of Plastics between - 30 oC and 30 oC with a Vitreous Silica Dilatometer
E805 Color Difference Measurements (Instrumental)
D1544 Color of Transparent Liquids
E308Computing Color Properties Using the CIE System
D4585 Condensation Humidity Exposure (CCH)
D562 Consistency of Paint Measuring Krebs Units (KU) Viscosity Using a Stormer-Type Viscometer
D1654 Corrosion Resistance
D3359 Crosshatch (Tape) Adhesion
D1475 Density of Liquid Coatings & Inks
D5767 Depth of Image (DOI), Instrumental Method
B527Determination of Tap Density of Metallic Powders & Compounds
D1186 Dry Film Thickness (DFT), Ferrous Materials
D6132 Dry film thickness of applied organic coatings using an ultrasonic gage
D1640 Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
D1652 Epoxy Content of Epoxy Resins
D714 Evaluating Degree of Blistering of Paints
D610Evaluating Degree of Rusting on Painted Steel Surface
D869 Evaluating Degree of Settling of Paint
D543 Evaluating the Resistance of Plastics to Chemical Reagents
D1210 Fineness of Grind
D522 Flexibility by Conical Mandrel
D4145 Flexibility of Coating on Prepainted Sheet
D2801 Flow and Leveling
D1200Ford #4 Viscosity
D2243 Freeze/thaw Resistance of Water-Borne Coatings
D1003 Haze and Luminous Transmittance of Transparent Plastics
D5007 Hiding (Wet-to-Dry Change)
D2805 Hiding Power of Paints by Reflectometry, Reflectance and Contrast Ratio
D4287 ICI Cone and Plate Viscosity
D4062 Leveling by Drawdown Method
D5178 Mar Resistance (Curved Stylus)
D4613 Measuring Apparent pH of Water Insoluble Phenol-Formaldehyde Resins
D5895 Measuring Times of Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
D4752 MEK Resistance
D2354 Minimum Film Formation Temperature (MFFT)
D711No-Pick Up Time of Traffic Paint
G154 Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
D1849 Package Stability of Paint
D3363 Pencil Hardness 
D823 Producing Films of Uniform Thickness of Paint, Varnish and Related Products on Test Panels
D5894 Prohesion Exposure (QUV/Salt Spray)
D4541 Pull-Off Strength of Coatings Using Portable Adhesion Testers
D4587 QUV Weathering Exposure
E179Reflectance & Transmission Properties of Materials
D4039 Reflection Haze of High-Gloss Surfaces
D332Relative Tinting Strength of White Pigments by Visual Observation
D2794Resistance of Organic Coatings to the Effect of Rapid Deformation (Impact)
D4400 Sag Resistance Using a Multinotch Applicator
B117Salt Spray Exposure
D2486 Scrub Resistance of Wall Paints
D3828 Setaflash by Closed Cup
E1989 Solar Reflectance Index (SRI Value)
D4707 Spattering
D153Specific Gravity of Pigments
D523 Specular Gloss
D2134 Sward Rocker Hardness
D4060 Taber Abrasion
D2247 Testing Water Resistance of Coatings in 100% Relative Humidity
D870Testing Water Resistance of Coatings Using Water Immersion
D344 Visual Evaluation of Hiding Power (Brushouts) 
D2369 Volatile Content of Coatings
D4828 Washability of Organic Coatings
D4017 Water in Paints and Paint Materials by Karl Fisher Method 
D1653 Water Vapor Transmission of Organic Coating Films
E96 Water Vapor Transmission of Sheet Materials
E313 Yellowing & Whiteness Measurement (Instrumental)
D1925Yellowing Index of Plastics
D3794Zahn Viscosity

*출처: www.anycerti.com
[J]

2016년 1월 25일 월요일

석유 및 가스 산업의 시험목록

부식(Corrosion) 시험 표준

ASTM G 48Standard Test Method for Pitting and Crevice Corrosion Resistance of Stainless Steel and Related Alloys by the use of Ferric Chloride Solution
ASTM G1 – 03 (2011) Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens 
DNV CN 33.1Corrosion prevention of tanks and holds
EEMUA 194 Guidelines for Materials Selection and Corrosion Control for Subsea Oil & gas Production Equipment 
EFC 17 Corrosion Resistant Alloys for Oil & Gas Production. Guidance on General Requirements and Test Methods for H2S Service 
EFC 23 CO2 Corrosion Control in Oil & Gas Production – Design Considerations 
EFC 39 The use of Corrosion Inhibitors in Oil & Gas Production 
EFC 42 Corrosion in refineries 
ISO 11972Corrosion-­‐resistant cast steels for general applications
ISO 12944 -­‐   3Paints and Varnishes – Corrosion protection of steel structures by protective paint systems – Part 3: Design considerations.
ISO 12944 -­‐   5Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 5: Protective paint systems.
ISO 13680 PGNI – Corrosion-­resistant alloy seamless tubes for use as casing, tubing and coupling stock – Technical delivery conditions 
ISO 15156-­‐3 PGNI – Corrosion-­resistant alloy seamless tubes for use as casing, tubing and coupling stock – Technical delivery conditions 
ISO 19840Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Measurement of, and acceptance criteria for, the thickness of dry film on rough surfaces
ISO 3506 -­‐   1Mechanical properties of corrosion resistant stainless steel fasteners – Part 1: Bolts, screws and studs.
ISO 3506 -­‐   2Mechanical properties of corrosion resistant stainless steel fasteners – Part 2: Nuts.
NACE MR 0175 Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments 
NACE RP 0169Control  of External  Corrosion on Underground or Submerged Metallic PipingSystems
NACE RP 0169 Standard Material Requirements, Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments 
NACE RP 0170Protection of Austenitic Stainless St eel s and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking during Shut down of Refinery Equipment
NACE RP 0170 Protection of Austenitic Stainless Steel in Refineries against Stress Corrosion, Cracking by use of Naturalizing Solutions during shutdown 
NACE RP 0175 Control of Internal Corrosion in Steel Pipelines and Piping Systems 
NACE RP 0176Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production
NACE RP 0176 Standard Recommended Practice, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production 
NACE RP 0177Mitigation of Alternating Current  and Lightning Effects on Metallic Structures and Corrosion Control  Systems
NACE RP 0192 Monitoring Corrosion in oil & gas production with iron counts 
NACE RP 0472Methods and Control s t o Prevent  In-­Service Environment al  Cracking of Carbon Steel  Weldments in Corrosive Petroleum Refining Environments
NACE RP 0675 Control of external corrosion on offshore steel pipelines 
NACE RP 0775Preparation and Installation of Corrosion Coupons and Interpretation of Test Data in Oil field Operations
NACE RP 0775 Preparation and installation of corrosion coupons and interpretation of test data in oil field operation 
NACE TM 0169 Control of external corrosion on underground or sub merged metallic piping systems 
NORSOK M-­‐503Cathodic Protection
NORSOK M-­‐506 CO2 Corrosion rate calculation model 
U.S. Mil. Spec. 18001Military Specification for Anodes, Corrosion preventive, Zinc; slab, disc and rod shaped.

스케일링(Scaling) 표준

NACE TM 0374Laboratory Screening Test  to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)
NACE TM 0197Laboratory Screening Test  to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/ or Strontium Sulfate from Solution (for Oil and Gas Production Systems
NACE TM 0397Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers
ASTM C672/C672MStandard Test Method for Scaling Resistance of Concrete Surfaces Exposed to
ASTM D4993-08Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis
STP 717Geothermal Scaling and Corrosion
ASTM D4692-01Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for Reverse Osmosis and Nanofiltration
ASTM 7126Standard Test Method for On-­‐Line Colorimetric Measurement of Silica
ASTM D859Test Method for Silica in Water

수압파쇄용액

ISO 3628-­‐6: the functional and material testing of hydraulic fluids, is available in the lab.

프로판트 시험 표준

API RP 56 -­‐ Recommended Practices for Testing Sand Used in Hydraulic Fracturing Operations 
API RP 58 -­‐ Recommended Practices for Testing Sand Used in Gravel Packing Operations 
API RP 60 -­‐ Recommended Practices for Testing High-­‐Strength Proppants Used in Hydraulic Fracturing Operations 
API RP 61 -­‐ Recommended Practices Evaluating Short Term Proppant Pack Conductivity 
ISO 13503-­‐1 / API RP 13M -­‐ Measurement of viscous properties of completion fluids 
ISO 13503-­‐2 / API RP 19C -­‐ Proppant crush test for hydraulic fracturing and gravel-­‐packing operations 
ISO 13503-­‐2 §4 and §5 – Sampling and Sample Handling 
ISO 13503-­‐2 §6 – Sieve Analysis (particle size) 
ISO 13503-­‐2 §7 – Sphericity and roundness 
ISO 13503-­‐2 §8 – Acid solubility 
ISO 13503-­‐2 §9 – Turbidity (fines and impurities) 
ISO 13503-­‐2 §10 – Density 
ISO 13503-­‐2 §11 – Crush resistance 
ISO 13503-­‐3 / API RP 13J -­‐ Testing of heavy brines 
ISO 13503-­‐4 / API RP 13M-­‐4 -­‐ Procedure for measuring stimulation and gravel-­‐pack fluid leakoff under static conditions 
ISO 13503-­‐5 / API RP 19D -­‐ Procedures for measuring the long-­‐term conductivity of proppants


*출처 : www.anycerti.com
[J]